Sendum BFA10082 Quick Start Manual

Welcome
Thanks for choosing the Sendum PT300D
as your Package Tracking solution! The
purpose of this Quick Start Guide is to help
you get your system up and running as
quickly as possible.
Introduction
Your PT300D device (model BFA10082) has
been configured for use with the Vodafone
wireless service.
The service your model is set for will depend
on what you specified when you ordered your
product. If in doubt, please review your sales
order or contact your sales rep.
Step 1: Get Familiar
PT300D Trackers come in many different
varieties and configurations. Depending on
what you ordered, you may have some, or all,
of the components listed in "Figure 1 - PT300D
Component List".
To get started working with your new PT300D,
at a minimum you will need the PT300D
Command Module complete with one of the
following:
• a Basic Sensor Pack with the AC Adapter
and Data Cable
• an Advanced Sensor Pack with the AC
Adapter and Data Cable, OR
• the Accessory Pack, complete with the 10k
mAh Battery Pack and Battery Charger
DPB00007
PT300D QuickStart Guide
PT300D
Command Module
Basic Sensor Pack
Advanced Sensor Pack
Accessory Pack
10k mAh
Battery Pack
P/N: BFA10179
Figure 1 - PT300D Component List
-- 1 --
Part Number BFA10082
Data Cable AC Adapter
P/N: MCA10017
P/N: BFA10069
P/N: BFA10062
P/N: BFA10063
or BFA10147
P/N: BFA10077
or BFA10145
Battery Charger
for 10k mAh Battery
P/N: BFA10095