Advertisement
Quick Links
Welcome
Thanks for choosing the Sendum PT300 as
your Package Tracking solution!
The purpose of this Quick Start Guide is to
help you get your system up and running
as quickly as possible.
Your PT300 device (model BFA10068) has
been configured for use with the Verizon
wireless service.
Step 1: Get Familiar
PT300 Trackers come in many different
varieties and configurations. Depending on
what you ordered, you may have some, or all,
of the components listed in "Figure 1 - PT300
Component List".
To get started working with your new PT300,
at a minimum you will need the PT300
Command Module complete with one of the
following:
• a Basic Sensor Pack with the AC Adapter
and Data Cable
• an Advanced Sensor Pack with the AC
Adapter and Data Cable, OR
• the Accessory Pack, complete with an
external power source such as the 10K
mAh Battery Pack (and Battery Charger)
PT300 QuickStart Guide
Part Number BFA10068 (for Verizon)
PT300
Command Module
Basic Sensor Pack
Advanced Sensor Pack
Accessory Pack
10k mAh
Battery Pack
P/N: BFA10179
Figure 1 - PT300 Component List
-- 1 --
USB to
AC Adapter
mini-USB
Cable
P/N: MCA10017
P/N: BFA10069
P/N: BFA10062
P/N: BFA10063
P/N: BFA10077
Battery Charger
for 10k mAh Battery
P/N: BFA10095
Advertisement
Related Manuals for Sendum PT300
Summary of Contents for Sendum PT300
- Page 1 PT300 Trackers come in many different varieties and configurations. Depending on P/N: BFA10063 what you ordered, you may have some, or all, of the components listed in “Figure 1 - PT300 Component List”. To get started working with your new PT300, Accessory Pack...
- Page 2 • If you are using either the Basic Sensor Pack or the Advanced Sensor Pack, you can charge it by connecting it to the AC Adapter Figure 2 - Locating the PT300 Device ID and then plugging the adapter into any standard electrical receptacle (see “Figure 3 - Charging up a Sensor Pack”).
- Page 3 PT300 Command Module (see “Figure Verizon service is simple: 2 - Locating the PT300 Device ID” a) Turn on your PT300 (see “1. Turning on page 2). This identifier is also on your PT300” on page 5). This known as ESN, MEID, or IMEI.
-
Page 4: Step 5 - Web Access
The username for this new account is the email address that you used, or specified, during purchasing. To obtain a password Once your PT300 has been configured, you will for this account, please go to findum. be able to track location, gather data, and view sendum.com and click the “Forgot your... - Page 5 Appendix PT300 Command Module 1. Turning on your PT300 You can turn on (i.e. power up) your PT300 by connecting the command module to a Sensor or Accessory Pack. Sensor Pack with sufficient To make the connection, simply push the...
- Page 6 PT300 QuickStart Guide 2. Turning off your PT300 4. LED Light Indications To turn off (or power down) your PT300, simply Status Description unplug the PT300 Command Module from your Device in carrier coverage Green Sensor or Accessory Pack. area...
Need help?
Do you have a question about the PT300 and is the answer not in the manual?
Questions and answers