Advertisement

Quick Links

Introduction

The PT300D (in combination with the SP300
Sensor Pack) monitors and reports real-time
location and sensor data.
The device is powered by a long-life lithium-ion
battery and has been designed for worldwide
operation. Sensors include temperature, relative
humidity, pressure, motion, shock, vibration,
orientation, light, and battery level.
What's in this Guide
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
What's in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting The Modules . . . . . . . . . . . . . . . . . . . . . 2
Battery Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Safety, Care, And Handling . . . . . . . . . . . . . . .3
Product Contains A Lithium Battery . . . . . . . . . . . . . . 4
Disposal And Recycling . . . . . . . . . . . . . . . . . . . . . . . 4
Operating Environment . . . . . . . . . . . . . . . . . . . . . . 4
Led Light Indications . . . . . . . . . . . . . . . . . . . . .4
Fcc Compliance . . . . . . . . . . . . . . . . . . . . . . . . .5
Doc. # DPB00006
Device Operating Manual
PT300D with SP300
What's in the Box
PT300D Command
Module
AC Adapter Cable
All of these components should be in your
original PT300D product package.
Sensor Pack SP300
AC Adapter
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PT300D and is the answer not in the manual?

Questions and answers

Summary of Contents for Sendum PT300D

  • Page 1 Device Operating Manual PT300D with SP300 Introduction The PT300D (in combination with the SP300 Sensor Pack) monitors and reports real-time location and sensor data. The device is powered by a long-life lithium-ion battery and has been designed for worldwide operation. Sensors include temperature, relative humidity, pressure, motion, shock, vibration, orientation, light, and battery level.
  • Page 2 Connecting the Modules The PT300D Command Module and SP300 Sensor Pack are designed to work together. To connect them, simply slide the Sensor Pack into the PT300D Command Module using the guiding tabs until you hear a confirming “Click” sound. End View...
  • Page 3 Device Operating Manual PT300D with SP300 In order to use your PT300D, you’ll need to over time. If you notice a change in your have the battery in your Sensor Pack fully battery life, it is probably time to purchase charged.
  • Page 4 Operating Environment of time. Battery charge level near Green a. For active use, the PT300D is rated for full (80%+) Battery -20° C to +65° C / -4° F to +140° F and Battery needs recharging <95% RH (non-condensing).
  • Page 5 1. l’appareil ne doit pas produire de brouillage, et 3. 10224A-201906EG21G 2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le Sendum (the “Grantee”) is not brouillage est susceptible d’en compromettre le responsible for any changes or fonctionnement.

This manual is also suitable for:

Sp300

Table of Contents