Table of Contents
Advertisement
12
Reset
13
Network status
information.
14
Information about this
device
Note: In a standby or DVR calendar, the device will be in screen saver state if no operation is
performed within 4 hours.
List of entry stations.
Reset unread tags in
internal memory.
Reset unread tags in
external memory.
Reset all unread tags.
Reset call parameter.
Technical information
about the status of the
network.
Version of the
program.
Update the program.
Private device: If enabled, you can only call or
be monitored by this family.
Run: Appears only after enabling "Private
Device". If enabled, a private entry station can
call this family.
Monitor: If enabled, internal monitors can
monitor this vst. Unit.
Edit: to enter settings vst. the correct password.
Monitor unlock: If enabled, you can open the
door or gateway with the Unlock button in a
monitoring state.
Unlock time: optionally 0.8-30 seconds.
Door lock status: set the unlock time of the lock
and the type of signal for unlocking.
Gate lock status: set the unlock time of the lock
and the signal type for unlocking.
Outgoing button type: Select the destination of
the outgoing button, door, or gateway.
You can enable/disable the status of the
assigned unlocking device (if there is a station
with RFIDfunctionality on the system).
Assigned unlocking device
Tamper status: If tamper sabotage contact is
active, it triggers an alarm when tampering is in
place. Unit.
Only to check the health of the network on the
system.
Advertisement
Table of Contents
