Scanning Office Documents - Fujitsu ScanSnap S300 Getting Started Manual

2. Change the scanning settings
on the [ScanSnap Manager -
Scan and Save Settings]
dialog box.
You can update your last-saved
settings for scanning when
[SCAN Button Settings] is
selected.
There are six tabs used to
configure the scan options at
maximum (The number of tabs
displayed and items that can be
configured vary depending on
the interacting application and
the Operation mode.)
3. Click the [OK] button to finish
the configuration.
The new settings are enabled.
⇒

3.3 Scanning Office Documents

This section describes how to scan the documents generally used in most offices. The
ScanSnap can scan the documents in various sizes.
1. Pull up the Paper chute guide and open the extension in the order given,
and load the documents onto the scanner.
Paper chute guide
23
For details of how to scan documents, refer to "Chapter 3 Using the
ScanSnap" of "ScanSnap S300 Operator's Guide."
Side
guide
Set the paper face-
down with its top
margin towards the
scanning direction.
Scanning
direction
[SCAN] button