2) Rear Panel Sub Assembly Test - Digital
Items Required
1 ME4 Rear Panel (DUT)
1 Known Good ME4 Front Panel Sub-Assembly (Front Panel)
This front panel should have been reset as described in Section 7
"RESET."
1 Known Good BB01 Power Supply with internal 4-pin power cable
1 IEC power cable
1 ADAT Optical cable
1 24 pin DIL cable for Rear Panel to Front Panel connection.
1 5-pin DIN Male to Male standard MIDI cable
Assembly
1)
Connect 24 pin DIL cable from the Front Panel J6 to the DUT J12.
sure that the Pin 1 stripe on the cable is oriented correctly on both
sub-assemblies.
2)
Connect the 4 pin clip-lock power cable from the BB01 Power Supply to
the DUT J13.
3)
Connect the 5-pin DIN Male to Male MIDI Cable from the MIDI IN jack
to the MIDI OUT jack.
4)
Sub Assembly is ready for testing.
Continue with Power Test.
Be