Advertisement
3.1.10 Removing the power transformer assembly
(See Fig.26, 27)
• Prior to performing the following procedure, remove the front
panel assembly and the power unit section.
(1) Remove the four screws F' attaching the power transformer
assembly. The bracket comes off at the bottom of the rear
cover.
(2) Remove the screw G' attaching the power cord folder.
(3) Remove the two screws H' attaching the AC connect
board.
1-16 (No.MB371)
Power trnsfomer assembly
F'
F'
Fig.26
Rear cover
Power cord folder
G'
Fig.27
Rear cover
AC connect board
H'
H'
Advertisement
