Sony HKSP-1125 User Manual page 52

4. Menu Tree
Set whether to display the buttons for the first stage (Slot/
Convert/Setup/Adjust/Delay) or not. When set to On, the
buttons appear on the left of the display as shown below.
HKSP-1125 HD UP-CONVERTER Version 1.xx
Slot1
Slot
Convert
Setup
Adjust
Delay
Delay Output Delay Reference
Option
1
Select "4. Menu Tree."
2
Select On or Off with the jog L or R button.
3
Press the select R button (Save).
The selection in step 2 is stored.
If you do not change the settings, press the select L
button (Cancel).
5. Screen Saver
Set the screen saver function On or Off, and the period to
start the screen saver mode (1 to 60 minutes).
1
Select "5. Screen Saver."
2
Select On or Off with the jog L or R button.
If you select On, set the period to start the Screen
Saver mode.
If you select Off, skip to step 7.
3
Turn the jog roller to move the cursor to Elapsed
Period of Time.
4
Press the jog roller to highlight the set value.
5
Turn the jog roller to set the period to start the screen
saver mode.
6
Press the jog roller to decide the set period.
7
Press the select R button (Save).
The set period is stored.
If you do not change the settings, press the select L
button (Cancel).
52
Operations
Delay
1125
660 1171
Status
13:01:01
6. Background
Set the background color of the display window.
Note
The color of the task bar is fixed. You cannot change the
background color.
Background
A
Present Select1 Select2 Select3
239
192
95
Cancel
Yellow dot shows the color bar
being adjusted.
Palette Present shows the current background color, and
palette A shows the color to be adjusted. You can select
any desired color from Select 1 through 4, and Default.
The background color can be changed based on the color
of Present, Default, and Select 1 to 4 with the following
procedures. When 6. Background is selected again, the
color of Select 1 to 4 and Default returns to the original
color. The color of Present only is kept.
1
Select "6.Background."
2
Select the palette to be changed.
The color of the selected palette appears in A.
3
Select a desired color bar by turning the jog roller.
4
Press the jog L or R button to change the color.
Adjust the color repeating steps 3 and 4 using three
color bars.
5
Press the select R button (Save).
The background color changes.
If you do not change the color, press the select L
button (Cancel).
7. Alert Sound
Set the alert sound On or Off.
1
Select "7. Alert Sound."
2
Press the jog L or R button to select On or Off.
Pallete
Select4 Default
Color bars
Save
13:01:01