Sony HKSP-1125 User Manual page 39

Meta Data
Setup
Setting for inserting the
Settings for the system
Meta data.
Video SG
Selects the internal video
signal.
ARIB
Controls the ARIB transmission function.
OFF: ARIB data transmission is disabled.
ON: ARIB data transmission is enabled.
Notes
• If Format is set to 1080i/50, the button is dimmed and cannot be
selected.
• If UMID is set on the ARIB line, the ARIB menu cannot be set.
Tx UMID
Designates the line number for UMID data transmission.
OFF: The UMID transmission is not performed.
Line 9 to Line 20: Designates the line number for UMID data
transmission.
Adjustable range: Line 9 to Line 20 (If ARIB is set to ON, Line
19 and Line 20 cannot be selected.)
Factory setting: Line 17
Note
Line selection is set for each video format.
Rx UMID
Designates the line number for UMID data reception.
Line 9 to Line 22: Designates the line number for UMID data
reception.
Adjustable range: Line 12 to Line 20 for NTSC, Line 9 to Line 22
for PAL (If ARIB is set to ON, Line 18 and Line 19 cannot be
selected.)
Factory setting: Line 17
Note
Line selection is set for each video format.
Selects a signal from among the following:
Off: The internal signal generator is not used.
Color Bar 100%: A 100% color bar signal
Color Bar 75%: A 75% color bar signal
V Color Bar 100%: A 100% vertical color bar signal
V Color Bar 75%: A 75% vertical color bar signal
Ramp: A ramp signal
Ramp with Chroma: A ramp signal with color
10 Step: A ten-step signal
5 Step: A five-step signal
Cross Hatch: A cross hatch signal
Dot: A dot signal
Box1: A box 1 signal
Box2: A box 2 signal
V Ramp: A vertical ramp signal
V Ramp with Chroma: A vertical ramp signal with color
100% White: A 100% white signal
Gray: A gray signal
39
Menu