Wireless Keyboard; Additional Information - Fujitsu Stylistic 3400 Installation And User Manual

Wireless keyboard

To install a wireless keyboard, position the spacer pads at
either end of the portfolio base such that the wireless
keyboard fits snugly between them when installed (see
Figure 3).
Position four unused Velcro® squares at the top and bottom
of the exposed portion of the two strips, such that they are
all in contact with the wireless keyboard when it is laid into
the portfolio. Peel the backing from the squares, and posi-
tion the keyboard directly over them. Carefully lay the
keyboard onto the squares and press down firmly to attach
the squares to the bottom of the keyboard.

Additional Information

To attach the shoulder strap, open the spring-loaded clips
on the end of the strap, and attach them to the shoulder
strap D-rings on either side of the portfolio case (see
Figure 3 for location of D-rings).
The portfolio case is made of rugged materials, and is
designed to withstand daily use. Treat the case as you
would a briefcase or purse.
Occasionally, the portfolio may become soiled. To clean it,
brush it with a short-bristled brush. If necessary, use a
clean cloth and warm soapy water to wash the soiled area.
Do not submerge the case in water, as it may become
warped.
5