Usb Keyboard - Fujitsu Stylistic 3400 Installation And User Manual

Installing a keyboard
The Stylistic portfolio will accommodate two different types
of keyboard: a USB mini keyboard, or a small wireless
keyboard.

USB keyboard

To install a mini USB keyboard, remove the two spacer pads
that are attached to the Velcro® strips on the base of the
portfolio (see Figure 3). Save the pads for possible future use
with a wireless keyboard.
Position four unused Velcro® squares at the top and bottom
of the two strips, such that they are all in contact with the
USB keyboard when it is laid into the portfolio. Peel the
backing from the squares, and position the keyboard directly
over them. Carefully lay the keyboard onto the squares and
press down firmly to attach the squares to the bottom of the
keyboard. See Figure 2 for a fully assembled system in the
portfolio with a wired USB mini keyboard installed.
Secure the keyboard cable with the Velcro® straps behind
the pen holder. Route the cable end through the elastic guide
located adjacent to the USB port.
4
Always disconnect the USB cable from the USB
port prior to closing the portfolio case.