Table of Contents
Advertisement
Troubleshooting
Problem
Cause
Camera will not operate Power is not turned on.
CF card slot / battery cover opened.
Insufficient battery voltage.
Poor contact between camera and battery
terminals.
Camera will not record
Camera is in Playback or computer/printer
connection mode.
Flash is charging (Blinking
CF card full.
CF card not formatted correctly.
Solution
Turn on the camera.
See Turning the Power On/Off (p. 21)
Confirm that the CF card slot cover and battery cover are
securely closed.
Fully charge the battery, then put it in the camera.
Use the Compact Power Adapter.
Wipe the terminals with a clean, dry cloth.
Switch to Shooting mode.
See Switching Between Shooting and Playback (p. 22).
During a computer or printer connection, disconnect the
interface cable before switching the camera to Shooting mode.
on LCD monitor). Wait until
stops blinking and lights steadily, signaling that the
flash is charged, then press the shutter button.
Insert a new CF card.
If required, download the images to a computer and erase
them from the CF card to make space.
Format CF card.
See Formatting a CF Card (p. 19).
If reformatting doesn't work, the CF card logic circuits may be
damaged. Contact the nearest Canon Customer Support Help
Desk.
Appendix
139
Advertisement
Table of Contents
