Table of Contents
Advertisement
Setting the Power Saving Function
This camera is equipped with a power saving
function. Depending on the power saving setting
(p. 69), the camera may power down or the LCD
monitor may go off automatically.
Auto Power Down
[On]:
Shooting mode
Powers down approximately 3 minutes after the
last time a camera control is accessed. The LCD
monitor automatically shuts off approximately 1
1
minute*
after the last time a camera control is
accessed even if [Auto Power Down] is set to
[Off]. Press any of the camera's button to turn the
LCD monitor back on.
1
*
This time can be changed.
Playback mode
Powers down approximately 5 minutes after the
last time a control is accessed on the camera.
Printer Connection mode
Powers down approximately 5 minutes after the
last time a control is accessed on the camera.
[Off]:
The power saving function does not activate.
Display Off (Shooting Mode Only)
The LCD monitor shuts off after a specified period of time
elapses and no camera control is accessed.
The following time settings can be selected: 10 sec./20 sec./
2
30 sec./1 min.*
/2 min./3 min.
2
*
Default setting
8. Camera Settings
When the Auto Power Down Function
Activates
Turn the power on again.
Shooting mode: Close the lens cover, then open it
again.
Playback/Printer Connection mode: Press the
(Playback) button.
When the Display Off Function Activates
The LCD monitor will be displayed if any of the
camera's buttons are pressed.
Please note that the camera continues to
consume a minimal amount of power even
when the power saving function shuts it down.
The power saving function is disabled while a
slide show plays on the camera or during a
computer connection (p. 104, 117).
8. Camera Settings
109
Advertisement
Table of Contents
