Canon CDI-E151-010 User Manual page 164

or ImageBrowser (Macintosh), which are included
with the camera, you can make fine adjustments to
the image quality and coloration when the images
are converted, while maintaining the high quality of
the original image data. For further details, please
refer to the Software Starter Guide.
*
As measured by Canon's testing standard.
Tip for Using the Self-timer (p. 53)
Normally, the camera shakes a little when you press
the shutter button.
Setting the self-timer to delays the shutter release
for two seconds and allows the camera to stop
shaking, thus preventing a blurred image.
Even better results can be obtained by placing the
camera on a stable surface or by using a tripod to
shoot.
Histogram Function (p. 27)
The histogram is a graph that allows you to judge the
brightness of the shot image. The greater the bias
toward the left in the graph, the darker the image.
The greater the bias toward the right, the brighter the
image. If the image is too dark, adjust the exposure
compensation to a positive value. Similarly, adjust
the exposure compensation to a negative value if the
162 Appendix
image is too bright (p. 80).
Dark Image Balanced
Image
Managing Image Files (p. 112)
About File and Folder Numbers
Images are assigned file numbers from 0001 to
9900, and folders are assigned folder numbers from
100 to 998 (Folder numbers cannot contain 99 in the
last two digits).
DCIM DCIM
100 CANON 0001 0002
0101 0102
101 CANON
9801 9802
198 CANON
Folder numbers cannot contain 99 in the last two digits.
0001 0002
200 CANON
Bright Image
0099 0100
0199 0200
9899 9900
0099 0100