Panasonic CF-AX3 Series Operating Instructions Manual page 30

Handling and Maintenance
To clean the inside of the dust cover
Clean the inside of the dust cover once a month.
A Turn off the computer, and disconnect the AC adaptor.
B Close the display, and turn the computer over.
C Remove the battery pack.
D Remove the screw (B), and remove the dust cover (C) in the
direction of the arrow.
E Clean the inside of the dust cover.
F After cleaning, reset the dust cover (C), and secure the screw
(B).
CAUTION
l If dust is piled up inside the dust cover and hard to remove, use an electric cleaner.
Be careful not to inhale dust.
l Make sure no water or other liquid spills inside the dust cover, and pay attention not to drop
the screw inside the dust cover.
Dispose of Computer
„ Preparation
l Remove all peripherals (SD memory card etc.).
l Erase the stored data. (è
CAUTION
l Never disassemble the computer except before disposal.
l Refer to page 3 for precautions when disposing of the computer.
1. Turn off the computer.
l Do not use sleep/hibernation.
2. While connecting the battery pack, disconnect the AC adaptor.
3. While pressing the HOLD button, slide the power switch for more than five seconds.
The built-in battery's power output stops.
4. Turn over the computer, and remove the battery pack.
30
Reference Manual "Hard Disk Data Erase Utility")
C B