Notes And Q&A - 3R Anyty -VIEWTER-500UV Operating Instruction

7. Note and Q&A
Note
＊Shown magnification due to spec
The explained magnification in manual and product is based on displaying with 15 inches monitor
＊Images and screen shots in this manual
Images and screen shots in this manual is in the developing level of the product
＊Trademark
Name of product in this manual is all registered Trademark
Q&A
Q. I am not able to switch Viewter on or off
→Please see「Charging」of page 5 and follow the steps. Also, please check if the charging lamp
is lit up.
→Please turn LED dial and check if LED light is operating. Also please press menu button and check
if the menu screen could be displayed
→If the monitor is freezing during power on, please press shutter and '-' button at the same time
to reset the Viewter.
Q. No graphic. Unable to adjust focal point
→This product uses Magnification dial to adjust magnification and focal point. Please turn the
dial and check if displayed image is changing
→Type of focal point of VIEWTER is monofocal point. Please see the image on page 7 to adjust range
between Viewter and object.
Q. Unable to read SD card or save data
→Is the SD card loaded properly？ Please check and reload it especially for connection between
MicroSD card and adaptor
→Formatting SD card with PC or other device except for Viewter before connect with Viewter.
― 34 ―