●Measurement function
You are able to use「VIEWTER Plus」to insert measurement data into captured images. Each function
is in「Measurement」 on menu bar
●Use measurement function(length of line as an example)
①select 'Measurement Line' in 'Measurement'
②Next, please click two points of what you want to measure.
For example, click bottom and top part of the 'L' to measure its height.
※Some measurement needs to be clicked 3 times
Calibration ... Revising dimensions using the dimensions of the standard
Measurement Line ... Measure distance between two points
Measurement Continuous Line... Measure length of continuous line
Measurement Dot-Line ... Measure the length of perpendicular line
Measurement Radius Circle ... Measure length of radius
Measurement Diameter Circle ... Measure length of diameter
Measurement Three Point Circle
Measurement Arc ... Measure size of an appointed arc
Measurement Three points angle... Select 3 points and measure degree of the angle
Measurement Four points angle... Select 4 points and measure degree of the angle
Setting
Clear Calibration data
― 30 ―
... Measure a circle though 3 points
... Change font of input text.etc
... Clear all adjusted data