Led Adjustment; Display Scale - 3R Anyty -VIEWTER-500UV Operating Instruction

4.4 Adjust LED
The LED light is loaded on Viewter in order to adjust brightness of the object.
Press 「LED」 button to switch LED mode (3 options). To adjust brightness,
please use LED dial on flank of Viewter（→Page 3）.
Light off→White LED→UV LED（IR LED）

4.5 Display scale

You are able to long press 'OK' button during Still/Movie mode to display scale
on the scale. Use the scale to help match position and measure.
※The scale will only show on screen but not in saved data.
LED button（left side）
― 10 ―
OK button（Middle）
The scale will
displayed on screen
be