Miscellaneous Problems - Fujitsu Lifebook S7010 User Manual

S Series.book Page 63 Thursday, February 19, 2004 4:52 PM
Problem
The Built-in Display has If the spots are very tiny and
bright or dark spots. few in number, this is normal
for a large LCD display.
If the spots are numerous or
large enough to interfere with
your operation needs.
The application display You are running an application
uses only a portion of your that does not support 800 x
screen and is surrounded 600/1024 x 768 pixel resolution
by a dark frame. display and display compres-
sion is enabled.
The Display is dark when The Power Management utility
on battery power. default is set on low brightness
to conserve power.
You have connected an Your BIOS setup is not set to
external monitor and enable your external monitor.
it does not display
any information.
Your external monitor is not
properly installed.
Your operating system soft-
ware is not setup with the
correct software driver for
that device.
You have connected an Your external monitor is not
external monitor and it compatible with your LifeBook
does not come on. notebook.

Miscellaneous Problems

An error message is Application software often
displayed on the screen has its own set of error
during the operation of message displays.
an application.
Possible Cause
This is normal; do nothing.
Display is faulty; contact your support representative.
Display compression gives a clearer but smaller
display for applications that do not support 800 x
600/1024 x 768 pixel resolution. You can fill the
screen but have less resolution by changing your
display compression setting, (See the Video Features
submenu, located within the Advanced menu of the
BIOS. (See BIOS Setup Utility on page 29 for more
information)
Press [Fn] + [F7] to increase brightness or double-
click on the battery gauge and adjust Power Control
under battery settings.
Try toggling the video destination by pressing [Fn]
and [F10] together, or check your BIOS setup and
enable your external monitor. (See the Video Features
submenu, located within the Advanced Menu of the
BIOS. (See BIOS Setup Utility on page 29 for more
information)
Reinstall your device. (See External Monitor Port on
page 52 for more information)
Check your device and operating system
documentation and activate the proper driver.
See your monitor documentation and the
External Monitor Support portions of the
Specifications section. (See Specifications on page 77
for more information)
See your application manual and help displays
screens for more information. Not all messages are
errors some may simply be status.
T r o u b l e s h o o t i n g
Possible Solutions
63