Miscellaneous Problems - Fujitsu LifeBook P7000 User Manual

L i f e B o o k P 7 0 0 0 N o t e b o o k – S e c t i o n S i x
Problem
The Built-in Display has
bright or dark spots.
The application display
uses only a portion of
your screen and is
surrounded by a dark
frame.
The display is dark when
on battery power.
You have connected an
external monitor and it
does not display any
information.
You have connected an
external monitor and it
does not come on.

Miscellaneous Problems

An error message is
displayed on the screen
during the operation of
an application.
74
Possible Cause
If the spots are very tiny and few
in number, this is normal for a
large LCD display.
If the spots are numerous or
large enough to interfere with
your operation needs.
You are running an application
that does not support 800 x 600/
1024 x 768 pixel resolution
display and display compression
is enabled.
The default is set on low bright-
ness to conserve power.
Your BIOS setup is not set to
enable your external monitor.
Your external monitor is not
properly installed.
Your operating system software
is not setup with the correct soft-
ware driver for
that device.
Your external monitor is not
compatible with your LifeBook
notebook.
Application software often has
its own set of error message
displays.
Possible Solutions
This is normal; do nothing.
Display is faulty; contact your support representative.
Display compression gives a clearer but smaller
display for applications that do not support 800 x
600/1024 x 768 pixel resolution. You can fill the
screen but have less resolution by changing your
display compression setting, (See the Video Features
submenu, located within the Advanced menu of the
BIOS. (See BIOS Setup Utility on page 25 for more
information)
Press [Fn] + [F7] to increase brightness and adjust
Power Control under battery settings.
Toggle the video destination by pressing [Fn] and
[F10] together, or check your BIOS setup and enable
your external monitor. (See the Video Features
submenu, located within the Advanced Menu of the
BIOS. (See BIOS Setup Utility on page 25 for more
information)
Reinstall your device. (See External Monitor Port on
page 46 for more information)
Check your device and operating system
documentation and activate the proper driver.
See your monitor documentation and the
External Monitor Support portions of the
Specifications section. (See Specifications on page 87
for more information)
See your application manual and help displays
screens for more information. Not all messages are
errors some may simply be status.