Infrastructure Mode
To configure an D-Link DWL-A650 Wireless Network Adapter in
infrastructure mode:
1. Ensure that the "Locally Administered Address" checkbox is unchecked.
2. Choose the following settings:
2-22
−
Configuration Name: This field identifies the configuration. This name
must be unique. Configuration names are case insensitive.
−
Network Name (SSID): This is the name of the IEEE 802.11a
wireless network, for example, "D-Link 802.11a Wireless Network."
This field has a maximum limit of 32 characters. If this field is left
blank, the STA connects to the AP with the best signal strength.
−
Network Connection: AP (infrastructure).
−
Power Saving: This field allows the configuration of power
management options. The options are Off, Normal, and Maximum.
−
Turbo Mode: This field enables or disables D-Link turbo mode.
−
Locally Administered Address: This field defines the locally
administered MAC address (LAA). To enter a value in the address
field, the check box needs to be selected.