D-Link DW-690 User Manual page 115

6
Windows NT 4.0
Driver Installation and TCP/IP Setup
Windows NT 4.0 does not support Plug-and-plug. Therefore, the D-Link NDIS
driver installation uses an approach that is different from the installation used
in other Operating Systems. In order to install D-Link DWL-A650 Wireless
Network Adapter in Windows NT 4.0 with Service Pack 6, a PC Card utility
called CardWizard is used. If your computer system does not have
CardWizard utility pre-loaded, then you can purchase it from SystemSoft
Corporation (www.systemsoft.com) or you can download a 14-day evaluation
copy from ftp://www.systemsoft.com/pub/Wn51tren.exe. Note that
CardWizard requires Windows NT 4.0 Build 1381 (Service Pack 6) installed
in order to function correctly. Please install Service Pack 6 if your Windows
NT 4.0 is not updated.
After CardWizard utility is loaded, insert the D-Link DWL-A650 Wireless
Network Adapter into a 32-bit CardBus slot, and follow these steps to install
the NDIS driver:
1. CardWizard will detect the insertion of the D-Link CardBus card and show
the following screen. Click Correct to continue.
6-1