Configuration Of The Wlan Device; Flow Of Operations; Configuration Using Intel Proset Software - Fujitsu Lifebook P1510D User Manual

Configuration of the WLAN Device

The WLAN Device can be configured to establish wire-
less network connectivity using one of the following
tools:
Intel PROSet Software - The Intel PROSet Software
■
allows for multiple profile setup and supports auto-
matic profile switching. Support for most industry
standard security solutions is contained in this soft-
ware.
Atheros Client Utility - The Atheros Client Utility
■
software allows for multiple profile setups and sup-
ports automatic profile switching. Support for most
industry standard security solutions is contained in
this software.

FLOW OF OPERATIONS

1. Activate the WLAN Device (See Activating the
WLAN Device on page 88 for more information).
2. Configure the Wireless Network parameters.
Enter the network name (SSID)
■
Choose the appropriate WLAN architecture (Ad
■
Hoc or Infrastructure)
Choose Authentication method: Open, Shared,
■
WPA-Enterprise, WPA2-Enterprise, WPA-
Personal, or WPA2-Personal
If using static WEP keys, enter static WEP key and
■
choose key index.
3. Configure network settings (See Configure Net-
work Parameters on page 89 for more information)
TCP/IP settings
■
Workgroup or Domain settings.
■
CONFIGURATION USING
INTEL PROSET SOFTWARE
This section explains the procedure to properly
configure the WLAN device using the Intel PROSet Soft-
ware. Pre-defined parameters will be required for this
procedure. Please consult with your network adminis-
trator for these parameters:
Network Name - Also known as the SSID
Network Key (WEP) - Required if using static WEP
keys.
Authentication Type - Open, Shared, WPA, or WPA-
PSK
W i r e l e s s L A N U s e r ' s G u i d e
Procedure
1. Activate the WLAN device using either the Wire-
less On/Off Switch or the Intel PROSet software.
2. Click the [Start] button first and then [All Pro-
grams].
3. Click the icon [Intel PROSet Wireless] to execute
the Intel PROSet Wireless software.
4. Click the [Add] button. The General Settings dialog
displays.
5. Enter a profile name in the Profile Name field.
6. Enter the network SSID, in the Network Name
(SSID) field.
7. Click Infrastructure or Ad Hoc for the operating
mode.
8. Click [Advanced].
9. The Mandatory Access Point option is only used if
Infrastructure mode is selected. Use this option to
connect to a specific access point. Enter the MAC
address for the access point. Click OK to save the
setting and return to the General Settings page.
10. Click [Next].
11. If you are using Cisco CCX, click Cisco Options to
enable Cisco CKIP data encryption on the Security
Settings page. Check the Cisco Compatible Exten-
sions Options. If you have checked the Cisco's
"Mixed-Cell" box in the Advanced Setting, this
option must also be checked.
12. Click [OK].
13. Click Next.
14. Select Open, Shared, WPA-Enterprise, WPA2-
Enterprise, WPA-Personal, or WPA2-Personal in
the Network Authentication options.
15. Select either None, WEP, CKIP (if Enable Cisco
Client eXtentions is enabled, use CKIP or WEP), or
TKIP for the data encryption.
16. If WEP is selected, select either 64 or 128-bit for the
Encryption Level.
17. Select the key index 1, 2, 3 or 4.
18. Enter the WEP key if required. If your network
does not employ a 802.1x/EAP security mecha-
nism, please skip to step 24.
89