Device Ports; Modem (Rj-11) Jack; Internal Lan (Rj-45) Jack; Docking Port - Fujitsu Lifebook P1510D User Manual

L i f e B o o k P S e r i e s N o t e b o o k / T a b l e t P C

Device Ports

Your LifeBook P Series notebook/Tablet PC and the
optional Port Replicator come equipped with multiple
Device Ports to which you can connect an external
device including: disk drives, keyboards, modems,
printers, etc.

MODEM (RJ-11) JACK

The modem (RJ-11) jack is used for an internal modem.
To connect the telephone cable follow these easy steps:
(See figure 2-7 on page 12 for location)
1. Align the connector with the jack opening.
2. Push the connector into the jack until it is seated.
3. Plug the other end of the telephone cable into a
telephone outlet.
The internal modem is not intended for
use with Digital PBX systems. Do not
connect the internal modem to a Digital
PBX as it may cause serious damage to the
internal modem or your entire LifeBook P
Series notebook/Tablet PC. Consult your
PBX manufacturer's documentation for
details. Some hotels have Digital PBX
systems. Be sure to find out BEFORE you
connect your modem.
■ The internal modem is designed to the
ITU V.90 standard. Its maximum speed
of 53000 bps is the highest allowed by
FCC, and its actual connection rate
depends on the line conditions. The
maximum speed is 33600 bps at upload.
The internal modem on all LifeBook P
■
Series notebook/Tablet PC's from Fujitsu
Computer Systems Corporation are
certified for use in the United States and
Canada.
Depending upon the configuration of
■
your system, your LifeBook notebook/
Tablet PC may have either a LAN jack or
an IEEE 1394 jack.

INTERNAL LAN (RJ-45) JACK

The internal LAN (RJ-45) jack is used for an internal 10/
100 BaseTx Ethernet connection. You will need to
configure your notebook/Tablet PC to work with your
particular network. (Please refer to your network
administrator for information on your network
configuration.) To connect the LAN cable follow these
easy steps: (See figure 2-7 on page 12 for location)
46
Note that the optional Port Replicator is
designed to cover the LAN jack located on
the system. This design ensures that the
LAN jack on the Port Replicator is the only
one used when the Port Replicator is
installed.
1. Align the connector with the jack opening.
2. Push the connector into the jack until it is seated.
3. Plug the other end of the cable into a LAN outlet.

DOCKING PORT

The docking port is used for the connection of your
system to an optional port replicator. In order to connect
your system to one of these devices follow the instruc-
tions that came with your port replicator. (See figure 2-8
on page 13 for location)

UNIVERSAL SERIAL BUS PORTS

The two Universal Serial Bus 2.0 ports (USB) allow you
to connect USB devices such as external floppy disk
drives, external DVD drives, game pads, pointing
devices, keyboards and/or speakers. USB 2.0 is down-
ward-compatible with USB 1.1 devices, so older USB
devices will work with these ports. USB 2.0 is a much
faster design, running forty times faster than USB 1.1.
In order to connect a USB device, follow these easy
steps: (See figure 2-7 on page 12 for location)
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.

MICROPHONE JACK

The microphone jack allows you to connect an external
mono microphone. Your microphone must be equipped
with a 1/8"(3.5 mm) mono mini-plug in order to fit into
the microphone jack of your notebook/Tablet PC. In
order to connect a microphone follow these easy steps:
(See figure 2-4 on page 9 for location)
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.

HEADPHONE JACK

The headphone jack allows you to connect headphones
or powered external speakers to your notebook/Tablet
PC. Your headphones or speakers must be equipped
with a 1/8" (3.5 mm) stereo mini-plug. In order to
connect headphones or speakers follow these easy steps:
(See figure 2-4 on page 9 for location)
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.