Port Replicator; Port Replicator Components; Attaching/Detaching Port Replicator - Fujitsu Lifebook P1510D User Manual

L i f e B o o k P S e r i e s N o t e b o o k / T a b l e t P C

Port Replicator

Release Latch
Port Replicator
An optional Port Replicator is available from Fujitsu to
support your LifeBook P Series notebook/Tablet PC.
The Port Replicator extends the functionality of your
system by providing ports to connect USB devices, an
external monitor, external speaker, or a LAN device. The
Port Replicator connects to the bottom of your note-
book/Tablet PC. See "Device Ports" on page 46.

PORT REPLICATOR COMPONENTS

Following is a description of the Port Replicator components.
(Figure 4-8)
DC Power Jack
The DC power jack allows you to plug in the AC adapter to
power your notebook/Tablet PC and charge the internal
Lithium ion battery.
USB 2.0 Ports (Qty. 2)
Universal Serial Bus (USB) 2.0 ports allow you to connect USB
devices. USB 2.0 ports are backward-compatible with USB 1.1
devices.
External Monitor Port
The external monitor port allows you to connect an external
VGA or SVGA monitor. Note that if a Port Replicator is
attached, you must use the external monitor port on the Port
Replicator, not the one on your system.
LAN (RJ-45) Jack
The LAN jack allows you to connect a LAN to the Port Repli-
cator. Note that when the system is attached to the Port Repli-
cator, the LAN Jack on the Port Replicator should be used, not
the one on the system.
44
External Monitor Port
USB Ports
Figure 4-8. Port Replicator rear panel
Docking Port
The docking port connects the Port Replicator to your LifeBook
notebook/Tablet PC.
Port Replicator Release Latch
Pull the Port Replicator Release latch away from the Port Repli-
cator to remove the Port Replicator from your notebook/Tablet
PC.
ATTACHING PORT REPLICATOR
To attach the Port Replicator, align the Port Replicator
connector on the bottom of your notebook/Tablet PC with the
connector on the Port Replicator and push the corners down
simultaneously.
DETACHING PORT REPLICATOR
To detach the Port Replicator:
1. Pull the Port Replicator's release latch away from the Port
Replicator to release it from your notebook/Tablet PC.
(Figure 4-10)
Docking Port
LAN (RJ-45) Jack
(Figure 4-9)
Figure 4-9. Attaching the Port Replicator
DC Power Jack