Table of Contents
Advertisement
Quick Links
Notes for operators and responsible maintenance personnel
★ Please read through this Instruction Manual as well as the separate Instruction
Manual "Safety (MN1-5994)" and "Cleaning, Disinfection and Sterilization
(MN1-6002)" carefully prior to use.
★ Keep this Instruction Manual together with the ultrasound diagnostic instru-
ment for any future reference.
© Hitachi, Ltd. 2014, 2017. All rights reserved.
VC41V Probe
Instruction Manual
Specification
MN1-5863 Rev.5
i
MN1-5863 Rev.5
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hitachi VC41V
Summary of Contents for Hitachi VC41V
- Page 1 ★ Please read through this Instruction Manual as well as the separate Instruction Manual “Safety (MN1-5994)” and “Cleaning, Disinfection and Sterilization (MN1-6002)“ carefully prior to use. ★ Keep this Instruction Manual together with the ultrasound diagnostic instru- ment for any future reference. © Hitachi, Ltd. 2014, 2017. All rights reserved.
- Page 2 MN1-5863 Rev.5...
- Page 3 MN1-5863 Rev.5 Introduction This is the instruction manual for VC41V probe. The probe is available by connecting to Hitachi's ultrasound diagnostic instrument and can be mainly used for observation of the uterus and surrounding organs Prior to use, read this manual as well as the separate instruction manual “Safety” in which information for safe use is provided.
-
Page 4: Table Of Contents
MN1-5863 Rev.5 CONTENTS 1. General Information ...........................1 1-1. Intended use ...................................1 1-2. Classification of ME equipment ............................1 1-3. Standard components ..............................1 1-4. Option ....................................1 2. Specifications and Parts name ........................3 2-1. Specifications .................................3 2-2. Name of each parts ................................4 3. Preparations before use ..........................5 3-1. -
Page 5: General Information
• Operation mode ....................Continuous operation • Method of sterilization ..................Refer to the separate instruction manual “Cleaning, Disinfection and Sterilization” 1-3. Standard components The standard components of VC41V probe are as follows. VC41V Probe ························································· 1 set Storage case ··························································· 1 set Instruction Manual •... - Page 6 MN1-5863 Rev.5...
-
Page 7: Specifications And Parts Name
At the time of publication of this manual, the connectable diagnostic ultrasound instrument or instrument software version available with this probe is different for each country, please refer to the instrument instruction manual or contact your local Hitachi representative. Electronic scan field of view: 140°... -
Page 8: Name Of Each Parts
MN1-5863 Rev.5 2-2. Name of each parts The name of each part is shown in Figure 2 and the explanation for each part is listed in Table 1. Rubber boot Front mark Handle Ultrasonic radiation part Cable Insertion portion Connector Figure 2 Name of each parts Table 1 Name of each part and its explanation Name... -
Page 9: Preparations Before Use
MN1-5863 Rev.5 3. Preparations before use This chapter describes preparations needed to use the probe safely. Please prepare the probe prior to each use by following the instructions below. 3-1. Visual check Visually check the ultrasonic radiation part, insertion portion, handle, cable, connector and rubber boot. If any holes, indentations, abrasion, cracks, deformation, looseness, discoloration, or other abnormalities are found, do not use the probe. - Page 10 MN1-5863 Rev.5...
-
Page 11: Operation
MN1-5863 Rev.5 4. Operation This chapter describes the operation of the probe and how to mount/remove the rubber boot. 4-1. Operation Mount a probe cover on the probe and insert the probe into the body cavity. An image of the region of interest is displayed on the monitor of the ultrasound diagnostic instrument. -
Page 12: How To Mount The Rubber Boot
Use by covering the rubber boot over the insertion portion. If the rubber boot is not used, residual pathogens on the scanner could infect the patient. Use Hitachi-approved rubber boots only. Use of an item lacking biocompatibility can cause an adverse reaction by the body of the patient. -
Page 13: How To Remove The Rubber Boot
MN1-5863 Rev.5 4-3. How to remove the rubber boot (1) Wrap the rubber boots in tissue paper and remove the rubber boots from the probe. (2) Dispose tissue paper and the rubber boots according to the infection prevention procedures of your facility. Caution Before disposing of the equipment, disinfect or take other infection-prevention measures. - Page 14 MN1-5863 Rev.5 This page intentionally left blank -10-...
- Page 15 MN1-5863 Rev.5 This page intentionally left blank -11-...
- Page 16 +81-3-6284-3668 http://www.hitachi.com/businesses/healthcare/index.html Overseas Offices: Hitachi Medical Systems GmbH Otto-von-Guericke-Ring 3 D-65205 Wiesbaden, Germany EU Importer: Hitachi Medical Systems Europe Holding AG Address: Sumpfstrasse 13 CH-6300 Zug, Switzerland US Importer: Hitachi Healthcare Americas Corporation Address: 1959 Summit Commerce Park, Twinsburg, Ohio 44087 Distributor MN1-5863 Rev.5 ‘17.08.31...
Need help?
Do you have a question about the VC41V and is the answer not in the manual?
Questions and answers