S-Video Out Port; Microphone Jack; Headphone Jack; External Monitor Port - Fujitsu Lifebook N6210 User Manual

N6210.book Page 48 Wednesday, May 18, 2005 10:24 AM
L i f e B o o k N S e r i e s U s e r ' s G u i d e
Figure 4-17. Connecting a USB Device

S-VIDEO OUT PORT

The S-Video port allows you to connect and use directly
any S-Video device, such as a VCR or television. The
S-Video standard provides for a higher quality picture
than Composite. In order to connect an S-Video device,
follow these easy steps: (Figure 4-18)
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.
Figure 4-18. S-Video Jack
■ There are several types of cables for
connecting a digital electronic device
(e.g., MD player) to the digital audio-
out connector, depending on the
connector type. The connector on your
computer is a Optical Mini Plug (3.5mm
diameter mini plug)
The frequency of the digital sound
■
output from the SPDIF output
connector is selectable as 48.0 kHz or
44.1 kHz. If a sampling rate converter is
not installed in your digital electronic
device (e.g., MD player), recording is
not possible. See the device user
manual for more details.
■ The sound recorded through
connecting a digital electronic device
(e.g., MD player) to the SPDIF output
connector cannot be used as digital
output. All output data from the SPDIF
output connector has copyright protec-
tion information included.
48

MICROPHONE JACK

The microphone jack allows you to connect an external
stereo microphone. Your microphone must be equipped
with a 1/8"(3.5 mm) mono mini-plug in order to fit into
the microphone jack of your LifeBook notebook. In
order to connect a microphone follow these easy steps:
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.

HEADPHONE JACK

The headphone jack allows you to connect headphones
or powered external speakers. In order to connect head-
phones or speakers follow these easy steps:
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.
If you plug headphones into the
headphone jack, you will disable the built-
in stereo speakers.

EXTERNAL MONITOR PORT

The external monitor port allows you to connect an
external monitor. In order to connect an external
monitor follow these easy steps:
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.
3. Tighten the two hold-down screws, located on
each end of the connector.
Pressing the [Fn] + [F10] keys allows you
to change your selection of where to send
your display video. Each time you press the
key combination, you will
step to the next choice, starting with the
built-in display panel only, moving to the
external monitor only, finally moving to
both the built-in display panel and an
external monitor.
Figure 4-19. External Monitor Connection