Table of Contents
Advertisement
Play USB and SD/MMC Card
1. Plug in the USB device noting correct orientation. Press [Mode2] , then choose
USB to select the content. 2. Insert a memory card to the SD/MMC slot. Press [Mode2] and
select SD to play memory card.
SYSTEM SETUP
1. Press "SETUP on the remote to bring up the SYSTEM SETUP MENU.
2. Press the directional buttons to go to or return to the required settings page.
3. When the required page is shown press the "OK" button to enter the page.
4. Use the directional buttons to navigate to the feature to be changed and then
press the right direction button to enter the submenu.
5. Use the directional buttons to select the submenu item and then press the "OK"
button to confirm.
6. Press the left direction button to return to the previous menu or press the
"SETUP" button to close the Setup Screen.
Note: Not all discs contain these features. Some features are disc dependent.
GENERAL SETUP PAGE
TV Display
4:3: When the player outputs signal to a normal monitor or TV. Wide-screen images
are shown on the screen. But with some parts cropped automatically.
Normal/LB: Normal/LB: When the player outputs signal to a normal monitor or TV, a normal
picture is shown on the screen with a black strip at both the top and bottom of the screen.
16:9: Wide: When the player outputs signal to a wide screen monitor or TV, a wide picture is
shown on the full screen.
Angle Mark
•
ON: The screen will show the angle mark icon. (If an angle option is available).
•
OFF: The screen will not display the Angle Mark.
SYSTEM SETUP
14
Advertisement
Table of Contents
