Miscellaneous Problems - Fujitsu Lifebook N3530 User Manual

L i f e B o o k N S e r i e s N o t e b o o k – S e c t i o n S i x
Problem
The built-in display does
not close.
The built-in display has
bright or dark spots.
The application display
uses only a portion of
your screen and is
surrounded by a dark
frame.
The Display is dark
when on battery power.
You have connected an
external video device
and it does not display
any information.
You have connected an
external monitor and it
does not come on.

Miscellaneous Problems

An error message is
displayed on the screen
during the operation of
an application.
70
Possible Cause
A foreign object, such as a paper
clip, is stuck between the display
and the keyboard.
If the spots are very tiny and few
in number, this is normal for a
large LCD display.
If the spots are numerous or large
enough to interfere with your
operation needs.
You are running an application
that does not support 800 x 600/
1024 x 768 pixel resolution
display and display compression
is enabled.
The BatteryAid default is set on
low brightness to conserve power.
Your BIOS setup is not set to
enable your external device.
Your external video device is not
properly installed.
Your operating system software is
not set up with the correct soft-
ware driver for that device.
Your external monitor is not
compatible with your LifeBook
notebook.
Application software often has its
own set of error message displays.
Possible Solutions
Remove all foreign objects from the keyboard.
This is normal; do nothing.
Display is faulty; contact your support representative.
Display compression gives a clearer but smaller
display for applications that do not support 800 x
600 /1024 x 768 pixel resolution. You can fill the
screen but have less resolution by changing your
display compression setting, (See the Video Features
submenu, located within the Advance menu of the
BIOS. (See BIOS Setup Utility on page 27 for more
information)
Press [Fn] + [F7] to increase brightness or double-
click on BatteryAid gauge and adjust Power Control
under battery settings.
Toggle the video destination by pressing [Fn] and
[F10] together, or check your BIOS setup and enable
your external video device. (See Video Features
submenu, located within the Advance Menu of the
BIOS. (See BIOS Setup Utility on page 27 for more
information)
Reinstall your device. (See External Video Port on
page 45 for more information)
Check your device and operating system
documentation and activate the proper driver.
See your monitor documentation and the External
Monitor Support portions of the Specifications
section.
See your application manual and help displays
screens for more information. Not all messages are
errors some may simply be status.