Miscellaneous Problems - Fujitsu Lifebook N3511 User Manual

N3510.book Page 70 Monday, April 25, 2005 9:05 AM
L i f e B o o k N S e r i e s N o t e b o o k – S e c t i o n S i x
Problem
The built-in display does A foreign object, such as a paper
not close. clip, is stuck between the display
and the keyboard.
The built-in display has If the spots are very tiny and few
bright or dark spots. in number, this is normal for a
large LCD display.
If the spots are numerous or large
enough to interfere with your
operation needs.
The application display You are running an application
uses only a portion of that does not support 800 x 600/
your screen and is 1024 x 768 pixel resolution
surrounded by a dark display and display compression
frame. is enabled.
The Display is dark The BatteryAid default is set on
when on battery power. low brightness to conserve power.
You have connected an Your BIOS setup is not set to
external monitor and it enable your external monitor.
does not display any
information.
Your external monitor is not
properly installed.
Your operating system software is
not set up with the correct soft-
ware driver for that device.
You have connected an Your external monitor is not
external monitor and it compatible with your LifeBook
does not come on. notebook.

Miscellaneous Problems

An error message is Application software often has its
displayed on the screen own set of error message displays.
during the operation of
an application.
70
Possible Cause
Remove all foreign objects from the keyboard.
This is normal; do nothing.
Display is faulty; contact your support representative.
Display compression gives a clearer but smaller
display for applications that do not support 800 x
600 /1024 x 768 pixel resolution. You can fill the
screen but have less resolution by changing your
display compression setting, (See the Video Features
submenu, located within the Advance menu of the
BIOS. (See BIOS Setup Utility on page 29 for more
information)
Press [Fn] + [F7] to increase brightness or double-
click on BatteryAid gauge and adjust Power Control
under battery settings.
Toggle the video destination by pressing [Fn] and
[F10] together, or check your BIOS setup and enable
your external monitor. (See Video Features submenu,
located within the Advance Menu of the BIOS. (See
BIOS Setup Utility on page 29 for more information)
Reinstall your device. (See External Monitor Port on
page 46 for more information)
Check your device and operating system
documentation and activate the proper driver.
See your monitor documentation and the External
Monitor Support portions of the Specifications
section.
See your application manual and help displays
screens for more information. Not all messages are
errors some may simply be status.
Possible Solutions