Left-Side Panel Components - Fujitsu Lifebook N3511 User Manual

N3510.book Page 10 Monday, April 25, 2005 9:05 AM
L i f e B o o k N S e r i e s N o t e b o o k – S e c t i o n T w o
Audio Input Jacks*
S-Video Input Jack*
Video Input Jack*

LEFT-SIDE PANEL COMPONENTS

The following is a brief description of your LifeBook
notebook's left-side components. (Figure 2-4)
Microphone Jack
The microphone jack allows you to connect an external
mono microphone. (See Microphone Jack on page 46 for
more information.)
Headphone Jack
The headphone jack allows you to connect headphones
or powered external speakers. (See Headphone Jack on
page 46 for more information.)
TM
ExpressCard Slot
The ExpressCard Slot allows you to install an Express-
Card. (See PC Cards/ExpressCards™ on page 43 for more
information.)
PC Card Slot
The PC Card Slot allows you to install a Type I or Type II
PC Card. (See PC Cards/ExpressCards™ on page 43 for
more information.)
USB 2.0 Port
The USB port allows you to connect Universal Serial Bus
2.0 or USB 1.1 devices. Note that there are three addi-
tional USB 2.0 ports on the rear of the system. (See
Universal Serial Bus Ports on page 46 for more informa-
tion.)
Memory Stick/SD Card Slot
The Memory Stick/SD card slot allows you to install a
flash memory card for data storage. This architecture
allows you to transfer data from a variety of different
digital devices. (See Installing Memory Stick/SD Cards on
page 40 for more information.)
10
Microphone Jack
Headphone Jack
1394 Jack USB Port
Memory Stick/SD Card Slot
Antenna Mini-Jack*
Figure 2-4. LifeBook notebook left-side panel
IEEE 1394 (4-pin) Port
The 1394 port is used to connect between your LifeBook
notebook and a peripheral such as a digital video
camera.(See IEEE 1394 Port on page 45 for more informa-
tion.)
Audio Input Jacks*
These jacks are used to connect to the audio output of
external devices such as video decks or set top boxes.
S-Video Input Jack*
This jack is used to connect to the S-video output port of
external video devices. The image output from a device
connected to this jack is displayed when "S-Video" input
is selected.
Video Input Jack*
This jack is used to connect to the video output of
external video devices. The image output from a device
connected to this jack is displayed when "Composite"
input is selected.
Antenna Mini-Jack*
This jack is used to connect a TV or cable TV using the
RF adapter included with the optional TV Tuner kit.
* Items marked with an asterisk (*) are found only in
models with the optional built-in TV Tuner. For instruc-
tions on operating these features, refer to the TV Tuner
User's Guide.
TM
ExpressCard Slot
PC Card Slot
Eject Buttons
* Items marked with an asterisk (*) are
located on the TV Tuner model only.