Table of Contents
Advertisement
L i f e B o o k N S e r i e s U s e r ' s G u i d e
Display Panel
Your Fujitsu LifeBook notebook contains a display panel
that is backlit for easier viewing in bright environments
and maintains top resolution through the use of active-
matrix technology.
OPENING THE DISPLAY PANEL
1. Slide the display panel latch to the right to release
the locking mechanism.
2. Lift the display panel backwards, being careful not to
touch the screen, until it is at a comfortable
viewing angle.
ADJUSTING DISPLAY PANEL BRIGHTNESS
Once you have turned on your LifeBook notebook, you
may want to adjust the brightness level of the screen to a
more comfortable viewing level. The Function keys on
the keyboard are used to change the brightness level of
the display.
Using the Keyboard to Change Display Brightness
[Fn+F6]: Pressing this key combination repeatedly will
lower the brightness of your display.
[Fn+F7]: Pressing this key combination repeatedly will
increase the brightness of the display.
28
Figure 3-2 Opening the Display Panel
If using AC power, your LifeBook notebook's bright-
ness setting is set to its highest level by default. If
using battery power, the brightness setting is set to its
middle level by default.
The higher the brightness level, the more power the
LifeBook notebook will consume and the faster your
batteries will discharge. For maximum battery life, set
the brightness level as low as possible.
CLOSING THE DISPLAY PANEL
1. Holding the edge of your display panel, pull it
forward until it is flush with the body of your
LifeBook notebook.
2. Push down until you hear a click. This will engage
the locking mechanism and prevent your display
panel from opening unexpectedly.
P O I N T S
Advertisement
Chapters
Table of Contents
Troubleshooting
