Description Of The Controls - Hyundai CV 23 Chateaux Instruction Manual

DESCRIPTION Of ThE CONTROLS

1. Light switch
2. Temperature adjustment buttons
3. LCD displey
4. Interior light
5. Chrome shelve
6. Feet
7. Door
8. Door handle
INSTRUCTIONS fOR USE
Setting The Temperature Control
The temperature inside the wine cooler is dependant on the ambient temperature (room temp.)
outside the wine cooler. The cooler temperature can range between 9~15 C. In red wine setting,
the cooler will keep the temperature range between 14~16 C (will stop cooling at 14 C and re-start
at 16 C) and in white wine setting, the cooler will keep the temperature range between 9~10.5 C
(stop at 9 C and re-start at approx. 10.5 C). This is based on an ambient room temperature of 25
C.
Set the required temperature with the buttons on the temperature controller. The temperature set-
tings will be shown on the LCD display.
Increase temperature in increments of 1°C
decrease temperature in increments of 1°C
The Light switch – Push ON, Push OFF interior light.
Connection
1) Insert the power plug into the power socket. Make sure the power socket is 230V~AC / 50Hz.
2) Allow the empty wine cooler to operate for approx. one hour. This will allow the wine cooler to
reach the desired temperature.
3) Fill the wine cooler with your choice of wine bottles. Allow 1-2 hours of operation before the
bottles reach the desired temperature.
EN - 16
EN