DESCRIPTION Of ThE CONTROLS
P1
Motor unit
P2
Switch I - speed 1
P3
Switch II Turbo
P4
Blender stick
P5
Measuring bowl
P6
Blade gear box adapter
INSTRUCTION fOR USE
ACCESSORy INSTALLATION
Insert the k attachment in the motor unit so that arrow facing to open symbol (Fig.1). Then
screw the shaff in the direction shown by the locked symbol (Fig.2), using gentle hand pressure
only ensures that the Shift is fully fightened on to the motor unit. To disassemble the attachment,
proceed inversely.
Fig. 1
P7
Blade
P8
Chopper bowl
P9
Whisk
P10
Whisk gear box adapter
P11
Wall amount
ENG - 21
Fig.2