Oxy Heli OXY2 Sh Instruction Manual page 31

Landing Gear & Battery Installtion
Oring
OXY0237-Bottom
Landing Gear
(Box 1/Bag 10)
Main Blades Installation
M2x10 Button
Head Screw
Note: The Oxy Main Grips have a 3.2mm root cavity
in order to work with any standard 190 / 210 main
blade root.
page 31
Satellite
EX
Landing Gear Skid
(Box 1/Bag 10)
205 mm Carbon
Main Blade
(Box 3/Bag 2)
Important Note: Use both double sided Hook
and Loop Velcro and the included battery
straps to fully secure the battery pack.
4x M2x8
Self Tapping Screw
Tail Blades Installation
Plastic Tail Blade
38 or 41mm
(Box 1/Bag 7)
Oxy tail blade dimension note: In order to assure
the best performance Oxy made a custom tail
blade with a 3mm root. If you use different tail
blades with a 2.5mm root you must use shims (not
included).
Information about 38 and 41mm tail blades: In the
kit we include two sets of tail blades - the 38mm are
designed for high head speed, the 41mm are designed
for low head speed. We recommends using 38mm
when head speed is higher than 4000rpm.
4x M2x8 Self Tapping Screw
don't over tighten