Advertisement
This module is only suitable for the
use on domestic knives and scissors
with straight blades.
Do not use any serrated knives.
•
Grinds all knives and scissors with straight blades.
•
Unique point for grinding knives.
•
Precise angled rail for sharpening scissors.
Knives
1. Slide the module marked "Knife & Scissor Sharpener" onto the power unit.
2. Switch the power on.
3. The knife has to be oriented so that its handle points towards the user; now, set the blade of the
knife into the guide slot (2a).
4. As soon as the blade touches the grinding disc, move it over the disc, exerting a slight pressure,
until you reach the point, then remove it. Make sure not to exert too high a pressure (2b).
5. Set the other face of the knife into the other guide slot (2c) and repeat step 4.
6. Sharpen the faces one after the other until the blades are well sharpened.
7. Switch the device off. Before removing the module, make sure that the grinding disc has come
to a rest.
Scissors
1. Slide the module marked "Knife & Scissor Sharpener" on the power unit.
2. Switch the power on.
3. Open the scissor completely.
4. Slide the first blade of the pair of scissors through the front guide slot (2d) and the joint and
other blade to the right.
5. Move the blade from the joint to the tip over the grinding disc. While doing so, exert a slight,
uniform pressure, but make sure that the pressure is not too high (2e).
6. Remove the pair of scissors and turn it to sharpen the other blade (2f) – slide the joint of the
pair of scissors to the right to sharpen it.
7. Repeat, if necessary, until the blades are well sharpened.
8. Switch the device off. Before removing the module, make sure that the grinding disc has come
to a rest.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 51251
Page 6
09
2021-1
Advertisement
