Advertisement
•
It is recommended to wear anti-slip shoes.
•
Securely tie long hair together.
•
It is recommended to use ear protection and gloves.
•
Always wear protective goggles. Note: Goggles compensating any debility of sight are not
shock-proof and thus not suitable for use as protective goggles.
•
With grinding jobs being performed that generate a lot of dust, always use a face or dust mask.
Maintaining and cleaning
•
Pull out the plug before performing any cleaning job.
•
Keep the device free from oil and grease.
•
Keep the device in a dry place.
General remarks
1. Fastener
2. HSS drill
3. V bar
"True
point"
action
pre-
cisely
grinds
the
correct
grinding angle
Sharpening high-speed steel parts
1. Fix the module marked "High Speed Steel Drill Sharpener" onto the power unit.
2. Remove the fastener from the fastener support and insert the drill to be sharpened (1a). Slightly
screw the fastener so that the drill is still easy to be moved.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 51251
Max. drill diameter: 10 mm (⅜")
Min. drill diameter: 3 mm (
⁄
")
7
64
Page 4
09
2021-1
Advertisement
