Advertisement
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Technical specifications
Power supply
Power consumption (W)
Dimensions of grinding disc (㎜) ⌀ 50 × 8
Load-less rotation speed (rpm)
Drill diameter (㎜)
Chisel width (㎜)
Acoustic pressure (dB (A))
Acoustic power (dB (A))
Size (㎜)
Safety instructions and precautions
If using electrical devices, always obey the following basic precautions:
•
Pull the power plug out of the socket when you do not need to use the device, before you mount
or remove parts, and before you clean the device.
•
To protect yourself from electric shocks, you must not plunge the cable, power plug, or device
itself into water or other liquids. To reduce the danger of the device starting accidentally, make
sure that the power switch is off before plugging the power plug into the socket.
•
Do not operate a device the cable or plug of which is damaged, if the device itself is damaged
or has been dropped or damaged in another way.
•
Before operating the device, check it for damaged parts. Such parts need to be repaired or
replaced correctly.
•
Never use the device in a dangerous zone and do not expose it to humid or wet conditions.
•
Make sure that your work area is well-lit.
•
Make sure that the cable is not dangling over the edge of a table or touching a hot surface.
•
Only use the device or its accessories for its purpose stated.
•
Never let the grinding disc operating without supervision.
•
Keep all bystanders, especially children, in a safe distance from the working zone.
•
Grinding jobs generate sparks. Therefore, keep a safe distance between the device and all
flammable matter or material.
•
Never touch a rotating grinding disc.
•
The motor is not suitable for permanent operation. Therefore, make a pause after 15 min of
uninterrupted operation.
•
Never use the grinding disc without any module.
•
Before removing a module, pull out the power plug and wait for the grinding disc to come to rest.
Precautions concerning user
•
Do not wear loose clothes, ties, rings, bracelets, or other pieces of jewellery that could be caught
by moving parts.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
230 V ~ 50 Hz
95
6,000
3–10
6–51
74
87
approx. 23 × 15 × 16
Item 51251
Page 3
09
2021-1
Advertisement
