Port Replicator Problems; Floppy Disk Drive Problems; Hard Drive Problems; Keyboard Or Mouse Problems - Fujitsu Lifebook E8020 User Manual

E8020.book Page 55 Thursday, March 10, 2005 1:55 PM
Problem
LifeBook notebook fails to DVD/CD-RW/CD-ROM is
recognize DVD/CD-RW/ dirty or defective.
CD-ROM's.
(continued)
The DVD/CD-RW/CD- The Windows DVD/CD-RW/
ROM Access indicator on CD-ROM auto insertion func-
the Status Indicator Panel tion is active and is checking to
blinks at regular intervals see if a DVD/CD-RW/CD-
when no DVD/CD-RW/ ROM is ready to run.
CD-ROM is in the tray or
the DVD/CD-RW/CD-
ROM drive is not installed.

Port Replicator Problems

Note: Be sure to power down your LifeBook notebook before adding a printer to the Port Replicator parallel port.
LifeBook notebook does Port Replicator AC adapter is
not turn on when installed not plugged in.
in the optional Port
Notebook is not properly
Replicator
seated in the Port Replicator.

Floppy Disk Drive Problems

You cannot access your You tried to write to a write
floppy disk. protected floppy disk.
Floppy disk is not
loaded correctly.
The floppy disk drive may not
be properly installed.
Security is set to protect access
to floppy disk data.

Hard Drive Problems

You cannot access your The wrong drive designator
hard drive. was used by an application
when a bootable CD-ROM was
used to start the notebook.
Security is set so your oper-
ating system cannot be started
without a password.

Keyboard or Mouse Problems

The built-in keyboard does The notebook has gone into
not seem to work. Suspend mode.
Your application has locked
out your keyboard.
You have installed an Your external device is not
external keyboard or properly installed.
mouse, and it does not
seem to work.
Possible Cause
Wipe DVD/CD-RW/CD-ROM with a non-abrasive
CD cleaning cloth and reinsert. It if still will not
work try another DVD/CD-RW/CD-ROM in
the drive.
This is normal. However, you may disable this
feature.
Provide power to the Port Replicator.
Remove and re-dock your LifeBook notebook.
Eject the floppy disk and set it to write enable.
(See Preparing a Disk for Use on page 42 for more
information)
Eject floppy disk, check orientation and re-insert.
(See Ejecting a Disk on page 42 for more information)
Remove and re-install your floppy disk drive.
Verify your password and security settings.
Verify drive designator used by application is in
use by the operating system. When the operating
system is booted from a CD, drive designations
are automatically adjusted.
Verify your password and security settings.
Push the Power/Suspend/Resume button.
Try to use your integrated pointing device to restart
your system.
Re-install your device. (See Device Ports on page 48
for more information)
T r o u b l e s h o o t i n g
Possible Solutions
55