E8020.book Page 8 Thursday, March 10, 2005 1:55 PM
L i f e B o o k E 8 0 0 0 N o t e b o o k
USB 2.0 Port
S-Video Out Port
DC Power Jack
IEEE 1394 Jack
LEFT-SIDE PANEL COMPONENTS
The following is a brief description of your LifeBook
notebook's left-side components.
USB 2.0 Port
The USB 2.0 port allows you to connect Universal Serial
Bus devices. USB 2.0 transfers data at up to 480 Mbps
and is backward-compatible with USB 1.1 devices,
which transfer data at up to 12 Mbps. (See Universal
Serial Bus Ports on page 49 for more information)
Flexible Bay
The Flexible Bay can accommodate one of the following
devices. (See Flexible Bay Devices on page 19 for more
information)
Modular CD-ROM drive
■
Modular DVD/CD-RW combo drive
■
■
Modular Multi-Format DVD Writer
Modular Lithium ion battery
■
Weight Saver
■
Flexible Bay Release Latch
The Flexible Bay release latch releases the Flexible Bay
device.
IEEE 1394 (4-pin) Jack
The 4-pin 1394 jack is used to connect between your
notebook and an IEEE 1394 peripheral such as a digital
video camera. (See IEEE 1394 Port on page 50 for more
information)
8
Air Vents
Flexible Bay
MMC/SD Slot
Figure 2-5. LifeBook notebook left-side panel
DC Power Jack
The DC power jack allows you to plug in the AC adapter
to power your LifeBook notebook and charge the
internal Lithium ion battery.
MMC/SD Slot
The SD/MMC slot allows you to install a a Secure Digital
(SD) card or a Multimedia Card (MMC) for data
storage. This architecture allows you to transfer data
from a variety of different digital devices. (See Installing
MMC/SD Cards on page 43 for more information)
S-Video Out Port
The S-Video output is used to transmit a higher resolu-
tion video signal to a compatible TV or VCR.
(See S-Video Out Port on page 47 for more information)
Air Vents
The air vents allow air to circulate through the system to
cool down the components.
Flexible Bay Release Latch
Be sure not to block the air vents while the
system is operating, or damage to internal
components may occur.