Security Menu - Setting The Security Features - Fujitsu Lifebook C2210 Bios Manual

SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs and
to view the current data security configuration. Follow the
instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating Through The Setup
Utility on page 2 for more information.)
The tables show the names of the menu fields for the
Security menu and its submenus, all of the options for
each field, the default settings and a description of the
field's function and any special information needed to
help understand the field's use. The default condition is
no passwords required and no write protection.
P O I N T
If you set a password, write it down and keep it in a
safe place. If you forget the password, you will have to
contact your support representative to regain access to
your secured functions and data.
Main
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Minimum User Password Length:
Password on Boot:
KB Lock on Resume:
Boot from Removable Media:
Hard Disk Security
Owner Information
F1 Help
ESC Exit
PhoenixBIOS Setup Utility
Advanced Security
Select Item -/Space
Select Menu Enter
Figure 13. Security Menu
P O I N T S
Entering a password incorrectly 3 times in a row will
n
cause the keyboard and mouse to be locked out and
the warning [System Disabled] to be displayed.
If this happens restart the computer by turning the
power off and on with the power switch and use the
correct password on reboot.
If you make an error when re-entering the password
n
a warning will be displayed on the screen. To try
again press the Enter key and retype the password.
Press the Esc key to abort the password setting pro-
cess.
If Password On Resume is Enabled and Password On
n
Boot is Disabled you will not have to type your pass-
word upon resuming the system from the Suspend or
Save-to-Disk modes. Password On Resume will work
only if Password On Boot is enabled.
Boot sector protection must be set to [Normal] to
n
install or upgrade an operating system.
Boot Info Exit
Item Specific Help
Clear
Clear
Press [Enter] key to
set Supervisor Password
[Enter]
to enable any password
[Enter]
features.
[0]
Then password entry is
[Disabled]
required to enter BIOS
[Disabled]
Setup.
[All]
Change Values
Select Sub-Menu
S e c u r i t y M e n u
F9 Setup Defaults
F10 Save and Exit
23