Fujitsu Lifebook C2210 Bios Manual page 15

Table 5: Fields, Options and Defaults for the Port Configuration Submenu of the Advanced Menu
Menu Field Options
Parallel Port: Disabled
n
Enabled
n
Auto
n
Mode: Output Only
n
Bi-directional
n
ECP
n
I/O address: 378 - 37F
n
278 - 27F
n
3BC - 3BF
n
Interrupt: IRQ 5
n
IRQ 7
n
Default Description
[Enabled] Configures the parallel port using either no configuration
(Disabled), a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration
(Auto).
[Bi-directional] When the parallel port is enabled this option is available
allowing the user to set the mode for the parallel port. Bi-
directional allows two-way transfer of information
between your notebook and a connected parallel device.
Output Only (Half Duplex) allows information to be
transferred in only one direction, from your notebook to
the printer or similar device. ECP Mode allows
communication with the ECP class of parallel I/O devices.
[378 - 37F] Allows user to set the parallel port base I/O address when
the parallel port is Enabled.
[IRQ 7] Allows user to set the parallel port interrupt when the
parallel port is Enabled.
A d v a n c e d M e n u
15