Advertisement
All manuals and user guides at all-guides.com
Operation of the Canister Vacuum
* Read operators manual thoroughly
prior to operating or servicing this
machine.
DRY PICKUP
1]
Remove The vac head of machine and
confirm that there is either a cloth of
paper filter in place.
2] Replace & the latch vac head.
* Be sure the machine is not plugged
into an outlet.
3] Connect vacuum hose to inlet on the
machine body.
4] Choose appropriate tool, and attach it
to the free end of the hose .
5] Plug power cord into grounded
outlet.
* Do not use an extension cord in
conjunction with the standard power
cord.
6] To start the machine push on the red
rocker switch turn on .
7] Check the filter bag periodically to see
if it is full. For optimal performance,
replace the bag when it is 3/4 full.
8] This machine is designed to be pulled
around by the vacuum hose, so pull the
hose, and the vacuum will follow.
10] To stop the machine at any time,
simply turn off the rocker switch.
MAINTENANCE
To keep the machine performing well for
many years, please follow the following
maintenance procedures.
* Always confirm that the machine is
unplugged prior to performing any
maintenance or repairs.
1] Unplug machine as soon as you are
done using it.
2] Check power cord for any damage. If
any damage is detected, replace the
cord immediately.
3] Lubricate casters with a water resistant
lubricant every month.
4] Check machine for loose or missing
nuts and bolts, and replace as
necessary.
5] Check the filter, and clean it after each
use.
6] Remove the vacuum hose and check it
for any holes and clogs.
7] Clean the outside of the machine with
a mild cleaner.
STORAGE
1] Unplug machine from power source.
2] Store in upright position in a dry area.
Advertisement
