Specifications; Packing List - Ego Power+ LB6500E Operator's Manual

SPECIFICATIONS

Voltage
Maximum air volume at nozzle 1105m
Maximum Air Velocity
Approx. Run Time
(with EGO 5.0Ah battery)
Maximum blowing force
Blower Weight
(without battery pack)
Recommended Operating
Temperature
Recommended Storage
Temperature

PACKING LIST

PART NAME
Blower
Should strap
Blower tube
Nozzle attachments
Operator's manual
DESCRIPTION
KNOW YOUR BLOWER (Fig. A)
1. Spread Nozzle
2. Flat Nozzle
3. Blower Tube
4. Tube-Release Button
5. Base
6. Air Intake
7. Battery-ejection
8. Electric Contacts
9. Latch
10. Battery Release Button
11. Air-speed Trigger
12. Boost Button
13. Speed/Lock-on Dial
14. Shoulder Strap
8
56 VOLT LITHIUM-ION CORDLESS BLOWER — LB6500E
understanding of the information on the tool and in this
instruction manual as well as knowledge of the project
56V
you are attempting. Before use of this product, familiarise
3 /h
yourself with all operating features and safety rules.
71.5m/s
ASSEMBLY
15min (Boost mode)
30min (High Speed)
200min (Low speed)
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
21N
result in serious personal injury.
2.17kg
or create accessories not recommended for use with this
-15°C-40°C
blower. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible
serious personal injury.
-20°C-70°C
cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
QUANTITY
APPLICATION
1
You may use this product for the purposes listed below:
1 ◾
Clearing hard surfaces such as driveways and
1 walkways.
◾
2
Keeping decks and driveways free from leaves and
pine needles.
1
NOTICE:
purpose. Any other use is deemed to be a case of misuse.
ASSEMBLING/REMOVING THE BLOWER TUBE
◾
To Assemble (Fig. B & C)
Align the groove and push the tube onto the blower
housing until you hear a "click".
◾
To Remove (Fig. D)
Press the tube-release button and pull the tube out.
ASSEMBLING/REMOVING THE BLOWER FLAT/SPREAD
NOZZLE
◾
To Assemble(Fig. E & F)
Align the groove in the flat nozzle with the tube knob
and push the nozzle onto the tube until it snaps into
place.
To Remove(Fig. G)
Press and hold the nozzle-release button to disengage
the latch, then pull the nozzle straight from the blower.
NOTICE:
remove the spread nozzle.
WARNING:
The safe use of this product requires an
WARNING:
If any parts are damaged or missing,
WARNING:
Do not attempt to modify this product
WARNING:
To prevent accidental starting that could
The tool is to be used only for its prescribed
Follow the same sequence to assemble or