Table of Contents
Advertisement
Auto redial
►
On: When this function is activated,
the phone will automatically try
to redial in the case of failure to
connect a call.
►
Off: Your phone will not make any
attempts to redial when the original
call has not connected.
Select line
(SIM dependent)
Depending on the support or not of 2
line services on your SIM card, you can
select the line you wants.
Send DTMF tones
You can send touch tones during
an active call to control your voice
mailbox or other automated phone
services.
Security
PIN code request
In this menu, you can set the phone to
ask for the PIN code of your SIM card
when the phone is switched on.
If this function is activated, you ll be
requested to enter the PIN code.
1. Select PIN code request in the
(Menu #.5.6)
2. Set On/Off.
3. If you want to change the setting,
4. If you enter wrong PIN code more
(Menu #.5.7)
5. You can enter your PUK code up to
10 times. If you put wrong PUK code
more than 10 times, you can not
unlock your phone. You will need to
(Menu #.5.8)
contact your service provider.
Auto key lock
If you activate this function, the key
will be locked automatically after
predefined delay time when the flip
Menu #.6
is closed.
(Menu #.6.1)
Phone lock
You can use a security code to avoid
unauthorised use of the phone.
Whenever you switch on the phone,
the phone will request security code if
you set phone lock to When switch on.
security settings menu, and then
press the left soft key [OK].
you need to enter PIN code when
you switch on the phone.
than 3 times, the phone will lock
out. If the PIN is blocked, you will
need to key in PUK code.
(Menu #.6.2)
(Menu #.6.3)
77
Advertisement
Table of Contents
