Table of Contents
Advertisement
The gas burner
Operation
Switching on
manually
Switching on
automatically
Safety system
It is essential to ensure that all the burner parts and the
pan supports are correctly installed for the appliance to
work correctly.
1. Press the burner control and turn it anticlockwise to
the "large flame".
2. Use any type of lighter or flame (cigarette lighter,
matches, etc.) and bring it close to the burner.
1. Press the burner control and turn it anticlockwise to
the "large flame".
While the control is still pressed down, sparks are
produced on the burner. The flame ignites (it is no
longer necessary to press down the control).
2. Turn the control to the required setting.
If it does not come on, turn the control to the off setting
and repeat the steps above. This time, press and hold
the control for longer (up to 10 seconds).
Warning! If after 15 seconds have elapsed, the flame
does not ignite, switch off the burner and open a nearby
window or door. Wait at least one minute before trying
to switch the burner back on.
Your hob has a safety system (thermocouple) that
prevents the flow of gas if the burner accidentally
switches off. To ensure that this device is active, switch
on the burner as usual and, without releasing the
control, press and hold it down firmly for 4 seconds after
lighting the flame.
8
Advertisement
Table of Contents
