Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siemens ER326AB91X
Summary of Contents for Siemens ER326AB91X
- Page 1 Operating instructions ER326AB91X to be used with Town Gas...
-
Page 3: Table Of Contents
Table of contents Safety precautions............ 4 Your new appliance ..........7 Burner ..................8 Switching on manually............8 Switching on automatically ............ 8 Safety system ................ 8 Switching off the burner............9 Power levels ................9 Warnings ................9 Suitable pans............... 10 Wok pan ................ - Page 4 Dear customer, Congratulations on your choice. Thank you for purchasing one of our appliances. This practical, modern functional appliance manufactured using materials of the highest quality which are subject to strict Quality Control checks throughout the entire manufacturing process. The appliance is meticulously tested to ensure that it meets your demands and produces perfect cooking results.
-
Page 5: Safety Precautions
Safety precautions Read these instructions carefully. Reading these instructions will enable you to use your appliance safely and effectively. Connection of Town Gas rubber tube -It must be used approved rubber tube bearing EMSD Approval marking (such “EMSD Approval GTXXXX”) and fuse cock for piped gas supply or regulator for connection. - Page 6 This appliance can only be installed in a well ventilated place in accordance with existing regulations and ventilation specifications. The appliance must not be connected to a combustion product removal device. This appliance has been designed for home use only. This appliance cannot be installed on yachts or in caravans.
- Page 7 If one of the controls will not turn, do not force it. Call the Technical Assistance Service immediately, so that they can repair it. Never place unstable pans on the hob or the burners, as they may accidentally tip over. Do not clean the appliance using a steam cleaner.
-
Page 8: Your New Appliance
Your new appliance Double-flame burner town gas hob with flame sensor Product description: safety device. 0.2 ÷ 4.4 kW (with town gas G110 at 10 mbar) Heat input: 0.2 ÷ 5.0 kW (with Hong Kong town gas at 12.5 mbar) Product dimension: 520 x 302 x 45 mm (D x W x H) Net weight:... -
Page 9: Switching On Manually
The gas burner Operation It is essential to ensure that all the burner parts and the pan supports are correctly installed for the appliance to work correctly. 1. Press the burner control and turn it anticlockwise to Switching on the “large flame”. manually 2. -
Page 10: Switching Off The Burner
Turn the control clockwise to the 0 setting. Switching off the burner Power levels The progressive controls can be used to control the power needed, from minimum to maximum power. For dual double flame burners, the inner and outer flames can be controlled separately. The available power levels are as follows: Inner and outer flame on full power. -
Page 11: Suitable Pans
Keep the burner as clean as possible. If the ignition sparkers are dirty, they will not light properly. Clean them periodically using a small non-wire brush. Bear in mind that the ignition sparkers must not suffer any serious impacts. An orange-coloured flame is normal. This is caused by the presence of dust in the atmosphere, split liquids, etc. -
Page 12: Accessories
The hob includes the following accessories. These are Accessories also available from the Technical Assistance Service. Only for use with pans which are more than 26 cm in Additional wok pan diameter (roasting dishes, earthenware pots, etc.) and support with pans with a concave base. Only for use with pans which are no more than 10 cm in Additional coffee diameter. -
Page 13: Precautions For Use
Precautions for use The following advice is intended to help you save energy and prevent cookware damage: Use pans which are the right size for each burner. Do not use small receptacles on large burners. The flame should not touch the sides of receptacles. Do not use damaged cookware, which does not sit evenly on the hob. -
Page 14: Cleaning And Maintenance
Cleaning and maintenance Once the appliance is cool, use a sponge to clean it Cleaning with soap and water. After each use, clean the surface of the respective burner parts once they have cooled down. If any bits are left (overcooked food, drops of grease etc.), however few, they will become stuck to the surface and more difficult to remove later. -
Page 15: Maintenance
Always clean off any liquid as soon as it is spilt: you will Maintenance save yourself any unnecessary effort. Grains of sand that may come from cleaning fruits and vegetables will scratch the glass surface. Melted sugar, or foods which contain a lot of sugar which may have spilt, should be cleaned off the hotplate immediately, using the glass scraper. -
Page 16: Faults
Faults Sometimes certain faults detected can be easily resolved. Before calling the Technical Assistance Service, bear in mind the following advice: Fault Possible cause Solution The general electrical Defective fuse. Check the fuse in the main fuse box system is and change it if it is damaged. -
Page 17: Technical Assistance Service
Technical Assistance Service When contacting our Technical Assistance Service, please provide the product number (E-Nr.) and production number (FD) of the appliance. This information is given on the specification plate located on the lower section of the hob. Warranty conditions The applicable warranty conditions are those set out by the company’s representative office in the country of purchase. - Page 20 Siemens-Electrogeräte GmbH Carl-Wery-Straße 34 81739 München 1030008 – 08.2010...