Canon Powershot A40 User Manual page 143

Image too large You attempted to replay an image whose file
Incompatible
JPEG format
Corrupted data You attempted to replay an image with
RAW
Unidentified
image
Cannot magnify! The image you attempted to magnify was
Cannot rotate! The image you attempted to rotate was
Protected!
Too many
marks!
Cannot mark
image
Exx
size was too large or whose
resolution exceeded 3200 × 2400 pixels.
You attempted to replay an incompatible JPEG
file.
corrupted data.
You attempted to replay an image recorded in
the RAW format.
You attempted to replay an image file recorded
in a unrecognized format (file recorded by a
different camera in a proprietary format, etc.).
recorded by another camera, or recorded in a
format that cannot be magnified, or edited on a
computer.
recorded by another camera, or recorded in a
format that cannot be rotated, or edited on a
computer.
You attempted to erase a protected image.
Too many images have been marked for
printing or transferring. Cannot process any
more.
You attempted to set the print settings for a
non-JPEG file.
Camera malfunction (where xx is the two-digit
error code). Try turning the camera off and back
on. If this message recurs frequently, note down
the error and call a Canon Customer Support
Help Desk. If this message appears immediately
after you have taken a shot, it is possible that the
camera failed to record the image—so you may
want to switch into Replay mode to check
whether the image was actually recorded.
139