Canon Powershot A40 User Manual page 12

¡Remove the power cord on a regular periodic basis and wipe
away the dust and dirt that collects on the plug, the exterior of
the electrical outlet and the surrounding area. In dusty, humid
or greasy environments, the dust that collects around the plug
over long periods of time may become saturated with humidity
and short-circuit, leading to fire.
¡Do not cut, damage, alter or place heavy items on the power
adapter cord. Any of these actions may cause an electrical
short circuit, which may lead to fire or electrical shock.
¡Do not handle the power cord if your hands are wet. Handling
it with wet hands may lead to electrical shock. When
unplugging the cord, ensure that you hold the solid portion of
the plug. Pulling on the flexible portion of the cord may
damage or expose the wire and insulation, creating the
potential for fires or electrical shocks.
¡Use of power sources not expressly recommended for this
equipment may lead to overheating, distortion of the
equipment, fire, electrical shock or other hazards. Use only the
recommended power accessories.
¡Do not place the batteries near a heat source or expose them
to direct flame or heat. Neither should you immerse them in
water. Such exposure may damage the batteries and lead to
the leakage of corrosive liquids, fire, electrical shock,
explosion or serious injury.
¡Do not attempt to disassemble, alter or apply heat to the
batteries. There is serious risk of injury due to an explosion.
Immediately flush with water any area of the body, including
the eyes and mouth, or clothing, that comes into contact with
the inner contents of a battery. If the eyes or mouth contact
these substances, immediately flush with water and seek
medical assistance.
¡Avoid dropping or subjecting the batteries to severe impacts that
could damage the casings. It could lead to leakage and injury.
8