Table of Contents
Advertisement
en Troubleshooting
Fault
"E:35 / -10"
All other error codes.
Malfunctions
Fault
The appliance is not work-
ing.
The programme does not
start.
48
Cause
The filter in the water inflow
is blocked.
The tap is turned off.
The water inlet hose is
kinked or jammed.
There is water in the base
trough.
The appliance is leaking.
Detergent dosage is too
high.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed
Door is not closed.
Childproof lock is activated.
troubleshooting
"Clean the water inflow filter"
▶
→ Page 46.
Turn on the tap.
▶
Ensure that the water inlet hose is
▶
not kinked or jammed.
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 56
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 56
Immediate measure: Mix one table-
▶
spoon of fabric softener with 0.5
litres of water and pour the mixture
into the left-hand compartment (not
for outdoor clothing, sportswear or
items stuffed with down).
Reduce the amount of detergent for
▶
the next washing cycle with the
same load.
Call the after-sales service.
▶
→ "Customer Service", Page 56
troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
.
Press
.
▶
Close the door.
1.
Press
to start the programme.
2.
→ "Deactivating the childproof
▶
lock", Page 39
Advertisement
Table of Contents
